Kathrein UFD 400 User Manual download pdf (Page 8)

Connecting up and putting into operation

UHF connection

If your TV set does not have a Scart socket, the connection to the TV set is made

via a coaxial cable (possibly via the video recorder) .

•

In this case, pull out the coaxial cable from the antenna input of the video re-

corder or the TV (if no video recorder is attached) and connect it to the satellite

receiver‘s terrestrial antenna input (view of rear panel, 3).

•

Using an additional coaxial cable, connect-up from the satellite receiver‘s TV

socket (view of rear panel, 4) to the video recorder, and from there to the TV

set.

Audio connection

If you want to hear the sound via the hi-fi system, connect the audio Cinch sockets

(view of rear panel, 6) and the hi-fi system with a Cinch cable.

Decoder connection

You can also connect-up a decoder to the receiver for Pay-TV programmes.

With decoders that require a video signal and supply a switching signal, such as

Premiere decoders and videocrypt decoders, for example, no further setting is ne-

cessary.

Important

With decoders that do not supply a switching signal, the video signal path must be

set to external at the receiver (see section “The video menu“ in chapter “Program-

ming TV programmes“).

Also comply with the decoder‘s instructions!

•

Connect the decoder to the decoder Scart socket with a Scart cable.

Mains connection

Now connect the receiver to the mains supply using the mains cable supplied for

this purpose.

Inserting batteries into remote control handset

•

Remove the cover on the rear of the remote control handset.

•

Insert both of the batteries supplied into the remote control handset.

Make certain that the batteries are inserted with the correct polarity

The polarity is marked at the bottom of the battery compartment.

•

Replace the cover again.

Note

Exhausted batteries are special waste and should not be disposed of with house-

hold refuse. Instead, hand them in to a collection centre for used batteries!

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

No comments

Kathrein UFD 400 User Manual Page 8