Kathrein UFS 922 Operations Instructions download pdf (Page 132)

132

Main menu - Interfaces (CI, hard disk and network)

Ethernet Settings

After calling up the menu you will see the following

display:

These settings should not be made unless the

receiver is linked into a network or is linked to a

PC/laptop using a crossed over network cable.

The Ethernet interface used in the receiver is a

10/100 base T Ethernet interface.

If you want to connect your receiver to a DHCP server, use the



buttons to select the “On” setting. If you want

to connect your receiver to a PC or laptop, the DHCP setting must be “Off”.

DHCP “On”

(DHCP server/router)

DHCP “Off”

(Hub/Switch/Direct connection

to PC or laptop)

The individual items are selected using the



buttons. Changes to the current settings can be made using the



buttons or the numeric keypad.

Use the



buttons to select the “Get IP Address”

eld and conrm by pressing the



button.

Your DHCP server now indicates the IP address to the

receiver. As soon as the receiver has received its IP

address from the DHCP server (and the IP address

is displayed),switch to the “Save” eld and conrm by

pressing the



button.

Make the settings for your network as required. When

you have completed all the settings, switch back to the

“Save” eld and press the



button to conrm.

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 183 184

No comments

Kathrein UFS 922 Operations Instructions Page 132