Kathrein CAP 910 Operations Instructions download pdf (Page 17)

INSTALLATION AND CONNECTION

Initially tighten the coaxial cable plugs ﬁ nger-tight, using no tools, then tighten them lightly using

an open-ended SW 11 spanner. Do not try to pull the cables from the unit. This could damage

the cables or loosen the cable connections.

• Apply a little adhesive sealant to the six threaded holes in the mounting plate and screw the

fastening screws into the thread.

Tighten the screws to a torque of 6 Nm.

• Run the connecting cables through the waterproof HDZ 100¹

)

roof gland into the interior of the

vehicle. In so doing the cables may not be crushed, kinked or damaged.

The connecting cables between the turntable and the connecting/control unit may

not be extended!

)

The HDZ 100 roof gland is available as an accessory under part number 20410032 from specialist

dealers.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

No comments

Kathrein CAP 910 Operations Instructions Page 17